System board, Replacing the fan assembly – Dell Dimension 4700 User Manual

Page 32

Advertising
background image

4.

Lift up the airflow shroud.

 

5.

Disconnect the fan power cable from its connector on the system board.

 

6.

Pull the fan release lever away from the back of the computer and slide the fan toward the release lever.

 

7.

Remove the fan assembly from the computer.

 

Replacing the Fan Assembly

 

1.

Align the fan assembly tabs with the holes in the back of the computer.

 

2.

Slide the fan assembly away from the fan release lever until it clicks in place.

 

3.

Reconnect the DC power cables to the drives and system board.

 

4.

Replace the computer cover.

 

5.

Connect the AC power cable to the AC power connector on the back of the power supply.

 

6.

Connect your computer and devices to electrical outlets, and turn them on.

 

System Board

 

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

Advertising