Dell Inspiron 8600 - Manual (Page 119)

Adding and Replacing Parts 119
Adding a Mini PCI Card
CAUTION: FCC rules strictly prohibit users from installing 5 GHz
(802.11a,802.11a/b, 802.11a/b/g) Wireless LAN Mini PCI cards. Under no
circumstances should the user install such a device. Only trained Dell service
personnel are authorized to install a 5 GHz Wireless LAN Mini PCI card.
If you are removing and/or installing a 2.4 GHz (802.11b, 802.11b/g) Mini PCI
Card, please follow the instructions noted below. Only products approved for use
in your portable computer may be installed. Approved Mini PCI Cards may be
purchased only from Dell.
NOTE: 2.4 GHz Wireless LAN PC Cards may be removed and installed by the user.
CAUTION: Before working inside your computer, read the safety instructions at
the front of this document (see page 11).
If you ordered a Mini PCI card with your computer, the card is already installed.
1 Ensure that the work surface is flat and clean to prevent scratching the computer
cover.
2 Save and close any open files, exit any open programs, and then shut down the
computer (see page 42).
3 If the computer is connected to a docking device (docked), undock it. See the
documentation that came with your docking device for instructions.
4 Disconnect the computer from the electrical outlet.
5 Wait 10 to 20 seconds, and then disconnect any attached devices.
6 Remove any installed PC Cards, batteries, and module bay devices.
NOTICE: Handle components and cards by their edges, and avoid touching pins and contacts.
Ground yourself by touching a metal connector on the back of the computer. Continue to ground
yourself periodically during this procedure.
7 Turn the computer over.