Dell Inspiron 8600 - Manual (Page 121)

Adding and Replacing Parts 121
9 If a Mini PCI card is not already installed, go to step 10. If you are replacing a Mini
PCI card, remove the existing card:
a Disconnect the Mini PCI card from any attached cables.
b Release the Mini PCI card by spreading the metal securing tabs until the card
pops up slightly.
c Lift the Mini PCI card out of its connector.
NOTICE: To avoid damaging the Mini PCI card, never place cables on top of or under the card.
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the
connectors and realign the card.
10 Align the Mini PCI card with the connector at a 45-degree angle, and press the Mini
PCI card into the connector until you feel a click.
Mini PCI card
connector
Mini PCI card
antenna
cables (2)