Dell Inspiron 8600 - Manual (Page 52)

52 Using Batteries and Module Bay Devices
www
.dell.com | support.dell.com
Checking the Charge on the Second Battery
Before you install a second battery, press the status button on the battery charge gauge to
illuminate the charge-level lights. Each light represents approximately 20 percent of the
total battery charge. For example, if the battery has 80 percent of its charge remaining, four
of the lights are on. If no lights appear, the battery has no charge.
Removing and Installing Devices While the
Computer Is Turned Off
Your computer ships with an optical drive installed in the module bay. However, the device
screw is not installed in the optical drive but packaged separately. When you install your
device in the module bay, you can install the device screw.
NOTE: You do not need to install the device screw unless you want to secure the module inside
the computer for security purposes.
second battery (top)
status button on the charge gauge