Dell PowerEdge C5125 - Manual (Page 50)

50 Installing System Components
Removing a Sled
1 Press the release latch down. See Figure 3-3.
2 Pull the sled out of the system.
Figure 3-3. Removing and Installing a Sled
Installing a Sled
Push the sled into the system until flush with the case and the release latch
locks. See Figure 3-3.
CAUTION: To ensure proper airflow in the system, if a sled is removed it should be
immediately replaced with another sled or sled dummy.
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 sled handle 2 sled release latch
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1
2