Dell PowerEdge C5125 - Manual (Page 63)

Installing System Components 63
Installing a Processor
1 Place the new processor into the socket.
NOTE: Align the processor notch with the socket. See Figure 3-13.
2 Close the locking lever. See Figure 3-13.
Removing the 2.5" Hard-Drive Board
1 Remove the hard-drives. See "Removing 2.5" Hard-Drives" on page 56.
2 Disconnect the four SATA cables between the hard-drive board and the
system board. See Figure 3-14.
Figure 3-14. Removing and Installing the 2.5" SATA Cables
3 Remove the eight screws from the hard-drive board. See Figure 3-15.
CAUTION: Positioning the processor incorrectly can permanently damage the
system board or the processor. Be careful not to bend the pins in the socket. Do not
use force to seat the processor.
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
HDD3 HDD3 HDD3
2.5” HDD 2.5” HDD 2.5” HDD
HDD2 HDD2 HDD2
2.5” HDD 2.5” HDD 2.5” HDD
HDD1 HDD1 HDD1
2.5” HDD 2.5” HDD 2.5” HDD
HDD3 HDD3 HDD3
HDD1
HDD1 HDD1
HDD2
HDD2 HDD2
SATA0 SATA0 SATA0
SATA3 SATA3 SATA3
SATA1 SATA1 SATA1
HDD0 HDD0 HDD0
SATA2 SATA2 SATA2
HDD0 HDD0 HDD0
2.5” HDD 2.5” HDD 2.5” HDD