Dell Inspiron 3500 - Manual (Page 78)

3-32 Dell Inspiron 3500 Portable Computer Reference and Troubleshooting Guide
If a system error message indicates a port problem or if equipment connected to a
port seems to perform incorrectly or not at all, the source of the problem may be any
of the following:
‡
A faulty connection between the I/O port and the peripheral device
‡
Incorrect settings for system setup options
‡
Incorrect settings in the operating system’s configuration files
‡
A faulty cable between the I/O port and the peripheral device
‡
A faulty peripheral device
‡
Faulty I/O port logic on the system board
‡
Conflicting COM port settings
‡
Lack of drivers
7URXEOHVKRRWLQJ WKH %DVLF ,2 )XQFWLRQV
Make a copy of the Diagnostics Checklist found in Chapter 5, and fill it out as you
complete the following procedure:
1. Check the settings for the Serial Port and Parallel Port Mode options in the
System Devices menu of the Setup program.
For information on the Setup program, see Chapter 2, “Customizing System
Features.” Are the communication port options set correctly for the peripheral
devices connected to the computer?
Yes. Go to step 3.
No. Go to step 2.
2. Change the Serial Port and Parallel Port Mode options to the appropriate set-
tings, and then reboot the system.
Is the problem resolved?
Yes. The problem is resolved.
No. Go to step 3.
3. Check the contents of your initialization and start-up files. (See “Installing and
Configuring Software” found earlier in this chapter.)
Are the port configuration commands correct?
Yes. Go to step 5.
No. Go to step 4.
4. Change the necessary statements in the start-up files.
If the port problem is confined to a particular application program, see the appli-
cation program’s documentation for specific port configuration requirements.