Dell Latitude Xpi CD - Manual (Page 101)

Factory Repair Parts A-19
Display Assembly Hinges
To remove a hinge (see Figure 4-14), follow these steps:
1. Remove the display assembly from the computer.
See “Display Assembly” in Chapter 4.
2. Remove the display assembly bezel.
See “Display Assembly Bezel” in Chapter 4.
3. Remove the LCD assembly.
See “LCD Panel” in Chapter 4.
4. Remove the display-assembly interface cable.
See “Display-Assembly Interface Cable” in Chapter 4.
5. Remove the hinge covers.
See “Hinge Covers” in Chapter 4.
6. Remove the display assembly base.
See the previous subsection, “Display Assembly Base.”
7. Rotate the display assembly hinges so that they point away from the
display assembly case at approximately 180 degrees.
8. To remove the hinge, remove the screw securing the hinge to the display
assembly case and disengage the hinge from the display assembly case.