Dell Latitude Xpi CD - Manual (Page 62)

4-24 Dell Latitude XPi CD Service Manual
LCD Inverter Board
Figure 4-18. LCD Inverter Board Removal
To remove the LCD inverter board, follow these steps:
1. Remove the display assembly bezel.
2. Remove screws I1 and I2 securing the display-interface cable retaining
bracket, and then remove the bracket.
3. Move the LED board out of the display assembly case far enough to
gain access to the LCD inverter board.
4. Disconnect the LCD-inverter board interface cable from ZIF connector
CN1 on the LCD inverter board.
5. Lift the LCD inverter board about 1/4 of an inch.
6. Disconnect the LCD power cable from connector CN2 on the LCD
inverter board.
7. Lift the LCD inverter board out of the display assembly case.
Part or Assembly Name Order Name
LCD inverter board ASSY,BD,INVRTR,TFT,SVGA12.1”
retaining bracket
I1 (5 mm)
I2 (5 mm)
5 mm
LED board
inverter board
display assembly case
connector CN1
connector CN2