Dell Studio Hybrid D140G (Mid 2008) - Manual (Page 18)

9. Replace the drive cage (see Installing the Drive Cage ).
10. Replace the computer cover (see Installing the Computer Cover ).
Removing the Optical Drive
1. Follow the procedure in Before You Begin .
2. Remove the computer cover (see Removing the Computer Cover ).
3. Remove the drive cage (see Removing the Drive Cage ).
4. Remove the four screws that secure the optical drive to the drive cage.
5. Hold the optical drive on either side and slide the optical drive out of the drive cage.
Installing the Optical Drive
1. Follow the procedure in Before You Begin .
2. Remove the computer cover (see Removing the Computer Cover ).
3. Remove the drive cage (see Removing the Drive Cage ).
4. Remove the existing optical drive, if applicable (see Removing the Optical Drive ).
5. Prepare the optical drive for installation and check the documentation that accompanied the drive to verify that the drive is configured for your computer.
6. Hold the optical drive on either side and gently slide the drive into the drive bay until it clicks into place.
7. Replace the four screws that secure the optical drive to the drive cage.
8. Replace the drive cage (see Installing the Drive Cage ).
9. Replace the computer cover (see Installing the Computer Cover ).
Back to Contents Page