Replacing the bluetooth board – Dell Inspiron 1546 (Late 2009) User Manual
Page 11
Replacing the Bluetooth Board
1.
Follow the procedures in
Before You Begin
.
2.
Align the Bluetooth board with the slot on the palm rest and adhere the Bluetooth board on the palm rest.
3.
Route the Bluetooth board cable through the routing guide and connect it to the system board connector.
4.
Replace the Bluetooth card (see
5.
Replace the keyboard (see
Replacing the Keyboard
).
6.
Replace the center control cover (see
Replacing the Center Control Cover
).
7.
Replace the hard drive (see
Replacing the Hard Drive
).
8.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
9.
Replace the module cover (see
Replacing the Module Cover
).
10.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
1
Bluetooth board
2
Bluetooth board cable
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.