Dell 1100 Laser Mono Printer User Manual
Page 28
Advertising
NOTE:
To prevent transparencies from sticking to each other, do not let the printed sheets
stack up as they are printed out.
NOTE:
Place transparencies on a flat surface after removing them from the printer.
NOTE:
Do not use transparencies that are separating from the backing sheet.
Load a sheet of card stock with the side to be printed on facing up, short edge first, from the
center of the tray.
NOTE:
Do not print on media smaller than 3.0 in. (76 mm) wide or 5.0 in. (127 mm) long.
Load a letterhead in the tray with the design face up, top edge toward the printer.
Advertising