Dell 1100 Laser Mono Printer - Manual (Page 9)

LED Description
The operator panel LEDs signify different things, depending on their sequence. LEDs that
are off, on, and/or blinking indicate printer conditions, such as printer status, intervention
(for example, out of paper and jammed paper), or service. For more information on what
the LEDs sequence means and what you can do, see "Understanding the Operator Panel
LEDs".
Button
Item Description
To print a demo page
In Ready mode, press and hold for 2 seconds until both LEDs blink slowly,
and release.
Manual feeding Press each time you load a sheet of paper in the tray, when you select
Manual Feed for Source from your software application.
For detailed information, see "Using Manual Feed Mode" .
To cancel a print job Press during printing. blinks red while the print job is cleared from
both the printer and the computer, and the printer then returns to Ready mode.
This may take some time depending on the size of the print job.
In Manual Feed mode, you can't cancel the print job by pressing .
Manual Duplex feeding Press each time you load the paper back in the tray after the first side of
your job has printed while manual duplex printing.
For detailed information, see "Printing on Both Sides of Paper (Manual Duplex)" .
Installing the Starter Toner Cartridge
Open the front cover. 1.