Dell POWEREDGE M1000E - Manual (Page 12)

2 EZSwitchSetup Administrator’s Guide
53-1002744-01
EZSwitchSetup software and hardware requirements
1
NOTE
Although your switch may have advanced capabilities, EZSwitchSetup is for a single-switch fabric
with FC ports only. To configure and manage other features on your switch, use the command line
interface, Web Tools, or Brocade Network Advisor.
EZSwitchSetup software and hardware requirements
You can run EZSwitchSetup on a SAN host computer or you can use a different computer that is not
part of the SAN, such as a laptop.
EZSwitchSetup requires a browser that conforms to HTML version 4.0 and JavaScript version 1.0.
The EZSwitchSetup installation CD automatically installs the correct Java Runtime Environment
(JRE) for the disk-based installation wizard. This does not affect any pre-installed JREs, but other
program components launched from the switch require Oracle JRE 1.7.0_9 or higher installed on
the host.
EZSwitchSetup is supported on the platforms shown in Table 1 .
The minimum hardware requirements for a Windows system are as follows:
• 90 MB of hard drive space for the EZSwitchSetup installation directory.
• 512 MB or more RAM for fabrics containing up to 15 switches.
• A minimum of 8 MB of video RAM is also recommended.
• An Ethernet port.
• A serial (COM) port if you plan to connect to the serial port on the switch.
TABLE 1 Supported platforms
Operating system Browser JRE version
SUSE Linux Enterprise 11 Firefox 12 Oracle JRE 1.7.0_9
Linux Red Hat 9 Mozilla Oracle JRE 1.7.0_9
Windows 7 Professional (x86) Internet Explorer 9.0
Internet Explorer 8.0
Firefox 12 Oracle JRE 1.7.0_9
Windows Server 2008 Standard Internet Explorer 9.0
Internet Explorer 8.0
Firefox 12 Oracle JRE 1.7.0_9
Windows 2003 Server, SP2 Internet Explorer 9.0
Internet Explorer 8.0
Firefox 12 Oracle JRE 1.7.0_9
Windows XP, SP3 Internet Explorer 9.0
Internet Explorer 8.0
Firefox 12 Oracle JRE 1.7.0_9