Dell POWEREDGE M1000E User Manual
Page 35
Advertising
EZSwitchSetup Administrator’s Guide
25
53-1002744-01
Connecting devices and completing the setup
2
FIGURE 19
EZSwitchSetup Configuration Finish window
5. Click Finish to complete the switch setup.
You are now ready to configure the storage component of the SAN using the documentation
that came with the storage server.
If you want to monitor the switch, then you need to launch the EZSwitchSetup Switch Manager.
Refer to
Chapter 3, “Managing Your Switch”
for instructions on using this interface.
Advertising