Dell POWEREDGE M1000E - Manual (Page 48)

38 EZSwitchSetup Administrator’s Guide
53-1002744-01
Adding a port license
3
Adding a port license
EZSwitchSetup Switch Manager allows you to enable Ports On Demand (POD) if you have a license
available. For the Brocade 7800, you can add the 7800 Upgrade License to activate ports 4–25.
This option is not available if all ports are already licensed.
1. Click Add Port License under Switch in the task panel.
A dialog box is displayed.
FIGURE 33 Add Port License dialog box
2. Enter the license key to add the additional ports.
3. Click Add License.
The ports can now be enabled.
4. Enable the ports using one of the following methods:
• Reboot or power cycle the switch
When the switch is rebooted, the newly licensed ports come up as enabled.
• Use the Advanced Management tool
See “Accessing Web Tools for advanced management” on page 48 for information on
launching Web Tools.
• Use the command line interface
See the Fabric OS Administrator’s Guide for information on using the command line
interface.
Managing devices
The Devices page displays the following information:
• Whether the device is an HBA, an HBA plus storage, or a storage only device.
• Device alias name, if one exists.
• Vendor name.
• Device name.
• WWN of the device port.
• Switch and port to which the device is connected.