Dell POWEREDGE M1000E - Manual (Page 34)

24 EZSwitchSetup Administrator’s Guide
53-1002744-01
Connecting devices and completing the setup
2
The Configure Ports and Connect Devices window provides visual feedback as you cable
the switch. A green line indicates that the connection is correct, a red line indicates an
invalid connection, and a blue line indicates a missing connection.
FIGURE 18 Installing Fibre Channel cable into an SFP transceiver
3. Verify that the connections displayed on the Configure Ports and Connect Devices window are
all green.
4. Click Next.
The EZSwitchSetup Configuration Finish window is displayed ( Figure 19 ).
1 Position the Fibre Channel cable 3 Brocade switch
2 Install the Fibre Channel cable
scale: 1/8" = 1"
! IOIO I
ATT ENT ION:
Max imu m s crew len gth for rac k
mo unt ing to b e 5 mm or 13/ 64 in.
2
1
3