Palm-rest assembly, Removing the palm-rest assembly – Dell Inspiron 15 (N5040, Mid 2011) User Manual

Page 29

Advertising
background image

Palm-Rest Assembly

29

7

Palm-Rest Assembly

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your

computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist

grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).

CAUTION:

To help prevent damage to the system board, remove the main battery

(see "Removing the Battery" on page 13) before working inside the computer.

Removing the Palm-Rest Assembly

1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the battery (see "Removing the Battery" on page 13).
3 Remove the 11 screws that secure the palm-rest assembly to the computer

base.

Advertising