Replacing the camera module – Dell Inspiron 15 (N5040, Mid 2011) User Manual

Page 68

Advertising
background image

68

Camera Module

Replacing the Camera Module

1 Follow the instructions in "Before You Begin" on page 9.
2 Connect the camera cable to the connector on the camera module.
3 Use the alignment posts on the display cover to snap the camera module

into position.

4 Replace the display bezel (see "Replacing the Display Bezel" on page 62).
5 Replace the display assembly (see "Replacing the Display Assembly" on

page 60).

6 Replace the hinge cover (see "Replacing the Hinge Cover" on page 55).
7 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest

Assembly" on page 32.

8 Replace the battery (see "Replacing the Battery" on page 14).

CAUTION:

Before turning on the computer, replace all screws and ensure that no

stray screws remain inside the computer. Failure to do so may result in damage to
the computer.

1

display cover

2 tabs (2)

3

camera module

4 camera cable

2

3

4

1

Advertising