Dell B1265dfw Multifunction Mono Laser Printer - Manual (Page 170)

Wireless network setup
170 2. Using a Network-Connected Machine
20
Turning the Wi-Fi network on/off
1 Check whether the machine is connected to the network.
2 Start a web browser such as Internet Explorer, Safari, or Firefox and enter
your machine’s new IP address in the browser window.
For example,
3 Click Login on the upper right of the Embedded Web Service website.
4 Type in the ID and Password, then click Login.
• ID: admin
• Password: dell00000
5 When the Embedded Web Service window opens, click Settings >
Network Settings.
6 Click Wireless > Custom.
You can also turn the Wi-Fi network on/off.
21
Setting the Wi-Fi Direct for mobile printing
Wi-Fi Direct is an easy-to-setup peer-to-peer connecting between method for
your printer and a mobile device that provides a secure connection and better
throughput than ad hoc mode.
With Wi-Fi Direct, you can connect your printer to a Wi-Fi Direct network while
concurrently connecting to an access point, You can also use a wired network
and a Wi-Fi Direct network simultaneously so multiple users can access and print
documents both from Wi-Fi Direct and from a wired network.
• You cannot connect to the internet through the printer’s Wi-Fi Direct.
• The supported protocol list may differ from your model, Wi-Fi Direct
networks do NOT support IPv6, network filtering, IPSec, WINS, and SLP
services.
Setting up Wi-Fi Direct
You can enable Wi-Fi Direct feature by one of the following methods.
From the USB cable-connected computer(recommended)
• When setting from the supplied software CD, see the access point via USB
cable.