Removing the drive-panel insert, Replacing the drive-panel insert – Dell XPS 400/Dimension 9150 User Manual

Page 42

Advertising
background image

Removing and Installing Parts: Dell XPS 400 Service Manual

file:///T|/htdocs/systems/xps400/sm/parts.htm[8/3/2012 3:11:45 PM]

Removing the Drive-Panel Insert

NOTICE:

Drive-panel inserts may contain screws on the inside. You can attach the screws to new drives that do not

have any screws.

NOTICE:

To avoid breaking the drive-panel insert tab, do not pull the insert more than approximately 1 cm (½ inch)

away from the drive panel before sliding the tab out of the slot.

1. On the inside of the drive panel, pinch the two drive-panel insert release tabs together and pull the insert out and to

the right just enough to release it from the drive panel.

2. Set the drive-panel insert aside in a secure location.

Replacing the Drive-Panel Insert

1. Place the drive-panel insert tab into the drive-panel slot.

2. Pinch the drive-panel insert release tabs and press the drive panel insert into place.

3. Ensure that the drive-panel insert is correctly seated in the drive panel.

Advertising