Floppy drive – Dell XPS 400/Dimension 9150 User Manual
Page 48
Removing and Installing Parts: Dell XPS 400 Service Manual
file:///T|/htdocs/systems/xps400/sm/parts.htm[8/3/2012 3:11:45 PM]
6. Gently slide the drive into place until you feel a click or feel the drive securely installed.
7. Connect the power and SATA data cables to the drive.
8. Check all connectors to be certain that they are properly cabled and firmly seated.
.
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the
computer.
10. Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
Floppy Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
opening the cover.