Dell Vostro 320 (Mid 2009) User Manual
Page 29
Back to Contents Page
Memory Module
Dell™ Vostro™ 320 Service Manual
Removing the Memory Module
NOTE:
You may need to install Adobe® Flash® Player from Adobe.com to view the following illustrations.
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
front bezel panel
.
3.
Remove the
internal panel
.
4.
Remove the
I/O cover
.
5.
Remove the
hinged stand
.
6.
Remove the
optical drive
.
7.
Remove the
back cover
.
8.
Remove the
back metal-shield
.
9.
Remove the
system-board shield
.
10.
Push down on the memory retention clips to release the memory module.
11.
Remove the memory module from its slot on the system board and place it on a clean, dry surface.
Replacing the Memory Module
To replace the memory module, perform the above steps in reverse order.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.