Removing the control panel – Dell Precision 470 User Manual
Page 118
Removing and Replacing Parts: Dell Precision Workstation 470 and 670 Computers User's Guide
file:///T|/htdocs/systems/ws670/EN/ug_en/before.htm[3/20/2013 9:31:52 AM]
3 hard-drive access light
4 power button
5 screw hole
Removing the Control Panel
NOTICE:
Before disconnecting a device from the computer or removing a component from the system board, verify
that the standby power light on the system board has turned off. To locate this light for the Dell Precision 670
computer, see "
" and for the Dell Precision 470 computer, see "
1. Remove the
2. Disconnect the control-panel cable from the I/O panel connector.
3. Disconnect the I/O panel cable from the connector on the system board. To locate the system board connector on the
Dell Precision 670 computer, see "
" and for the Dell Precision 470 computer, see "
."
4. Remove the mounting screw from the control panel.
Dell Precision 670 Workstation Computer
1 control panel
2 mounting screw