Dell Precision 470 - Manual (Page 139)

Tools to Help Solve Problems: Dell Precision Workstation 470 and 670 Computers User's Guide
file:///T|/htdocs/systems/ws670/EN/ug_en/advtrbl.htm[3/20/2013 9:31:57 AM]
Error: Memory configured incorrectly — See " Memory Overview " for memory installation guidelines.
Gate A20 failure — See " Lockups and Software Problems ."
Hard-disk configuration error —
Hard-disk controller failure —
Hard-disk drive failure —
Hard-disk drive failure —
See " Drive Problems ."
Insert bootable media — Insert a bootable floppy disk or CD.
Invalid configuration information - please run SETUP program — Enter system setup and correct the
computer configuration information.
Keyboard failure — See " Keyboard Problems ."
Memory address line failure at address, read value expecting value — See " Lockups and Software
Problems ."
Memory allocation error —
1. Turn off the computer, wait 30 seconds, and then restart the computer.
2. Try to run the program again.
3. If the error message appears again, see the software documentation for additional troubleshooting
suggestions.
Memory data line failure at address, read value expecting value —
Memory double word logic failure at address, read value expecting value —
Memory odd/even logic failure at address, read value expecting value —
Memory write/read failure at address, read value expecting value —
Memory size in CMOS invalid —
See " Memory Problems ."
No boot device available —
If the floppy drive is your boot device, ensure that a bootable floppy disk is in the drive.
If the hard drive is your boot device, ensure that the cables are connected and that the drive is installed
properly and partitioned as a boot device.
Enter system setup and ensure that the boot sequence information is correct.
No boot sector on hard-disk drive — Enter system setup and ensure that the computer configuration
information for the hard drive is correct.