Heat sink and processor, Removing the heat sink and processor, 10 heat sink and processor – Dell OptiPlex 390 (Mid 2011) User Manual
Page 27
Advertising
Heat Sink And Processor
10
Removing the Heat Sink and Processor
Before Working Inside Your Computer
.
2. Remove the
.
3. Remove the
4. Remove the
.
5. Disconnect the heat-sink assembly cable from the system board.
6. Release the Input/Output Board or the FlyWire cable from the routing
channel on the heat sink.
7. Loosen the captive screws in the order of 1,2,3 and 4.
27
Advertising