Input/output panel, Removing the input/output (i/o) panel, 14 input/output panel – Dell OptiPlex 390 (Mid 2011) User Manual
Page 37
Advertising
Input/Output Panel
14
Removing The Input/Output (I/O) Panel
Before Working Inside Your Computer
.
2. Remove the
.
3. Remove the
4. Remove the
.
5. Unthread the I/O panel/FlyWire cable from the fan shelter clip and heat
sink.
6. Disconnect the I/O panel/FlyWire cable from the system board.
7. Remove the single screw that secures the I/O panel to the chassis.
37
Advertising