Installing the power supply – Dell OptiPlex 390 (Mid 2011) User Manual
Page 43
Advertising
Installing The Power Supply
1. Place the power supply in the chassis and slide outward to secure it.
2. Use a Phillips screwdriver to tighten the three screws securing the power
supply to the back of the computer.
3. Connect the power cable to the system board.
4. Thread the power cable into the chassis clips.
5. Connect the power cable to the system board.
6. Install the
.
7. Install the
8. Install the
9. Install the
.
After Working Inside Your Computer
43
Advertising