Replacing the front panel and computer cover – Dell Precision 490 User Manual
Page 130
Back to Contents Page
Replacing the Front Panel and Computer Cover
Dell Precision™ Workstation 490 User's Guide
Rotating the Hard-Drive Carrier Back into the Computer
Rotating the Hard-Drive Carrier Back into the Computer
1.
Grasp the handle on the hard-drive carrier and rotate the carrier back into the chassis until the metal tabs on each side of the carrier are seated,
securing the carrier.
2.
Pull up on the card retention mechanism to release it from the hard-drive carrier.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer.
1 rotatable hard-drive carrier
2 handle
3 card-retention mechanism
1 card-retention mechanism tab