Dell Precision 490 User Manual
Page 88
13.
Replace the desktop drive retention insert and fold down its handle.
14.
Check all cable connections, and fold cables out of the way to allow for airflow between the fan and cooling vents.
15.
Reinstall the drive panel (see
16.
Ensure that all connectors are properly cabled and firmly seated.
17.
Replace the computer cover (see
Replacing the Computer Cover
).
18.
Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
19.
Enter the system setup program (see
System Setup
) and select the appropriate Drive option.
20.
Verify that your computer works correctly by running the Dell Diagnostics. See
Dell Diagnostics
for instructions.
Back to Contents Page
1 power cable
2 IDE data cable
3 SATA data cable
4 system-board SATA optical connector
5 system-board IDE connector
NOTICE:
To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.