Dell XPS M1530 (M1530, Late 2007) - Manual (Page 71)

Display Assembly 71
2 Remove the display bezel (see "Removing the Display Bezel" on page 68).
3 Remove the display panel (see "Removing the Display Panel" on page 69).
4 Turn over the display panel, placing it on a clean surface.
NOTICE: To avoid damage to the computer when replacing the bottom flex cable,
gently support the bottom of the inverter board with one finger as you reseat the
bottom flex-cable connector. Do not bend the inverter board.
5 Gently pull the pull-tab on the bottom flex-cable connector to release the
cable from the inverter board.
6 Lift the tape that secures the top flex-cable connector and disconnect the
connector.
1 pull-tab of the bottom flex-cable
connector
2 back of display panel
3 flex-cable 4 tape securing the top flex-cable
connector
1
2
3
4