S-video board, Removing the s-video board – Dell XPS M1530 (M1530, Late 2007) User Manual
Page 99
Advertising
S-Video Board
99
21
S-Video Board
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE:
To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
Removing the S-Video Board
1 Follow the procedures in "Before You Begin" on page 9.
2 Remove the system board (see "Removing the System Board" on page 95).
3 Remove the screw that secures the S-Video board to the system board.
Advertising