Replacing the usb board – Dell Inspiron 14 (1440, Mid 2009) User Manual
Page 47
Replacing the USB Board
1.
Using your index finger, route the USB connector into the USB connector slot in the computer base.
2.
Rotate the USB board to the left under the routing guide on the computer base and keep it in place.
3.
Align the hole on the USB board with the protrusion on the computer base.
4.
Replace the screw that secures the USB board to the computer base.
5.
Route the USB cable and connect it to the system board connector.
6.
Replace the palm rest (see
Replacing the Palm Rest
).
7.
Replace the power button board (see
Replacing the Power Button Board
).
8.
Replace the keyboard (see
Replacing the Keyboard
).
9.
Replace the center control cover (see
Replacing the Center Control Cover
).
10.
Replace the optical drive (see
Replacing the Optical Drive
).
11.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
12.
Replace the module cover (see
Replacing the Module Cover
).
13.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
5
routing guide
6
USB board cable connector