Parental control, Advance filtering – Dell 2350 Wireless Broadband Router User Manual
Page 106
5. Click the Submit button.
The repeater AP must be located within the coverage of your root AP in order to associate with the root AP and extend it's coverage.
NOTE:Ensure all Dell Wireless 2350 Broadband Routers are set to same wireless settings.
To Configure your Dell Wireless 2350 Broadband Router back as a root AP:
1. Click the option Enable this AP as a Root AP
2. Click the Submit button.
Restore Defaults
If you have customized your wireless system configuration, you can restore the wireless settings to factory defaults by clicking the Restore Defaults button.
Parental Control
Parental Control
IP filtering is a mechanism that the Dell Wireless 2350 Broadband Router to accept or deny certain types of IP datagrams based on the IP address, port number,
protocol type, and other criteria.
1.
Click the Add button. A pop-up Parental Control Rule window will appear.
2.
Click to select the IP address of the particular computer you want to control (for example, your child's computer) in the IP Address list.
3.
To block or grant access to the Internet during a period of time, specify the start and end time from the Time Restriction list.
4.
Click to select Allow or Deny from the Internet Access list.
5.
Enter the URL that you want to allow or deny the access in the Web Site Restrictions field.
6.
Click to select Allow or Deny access to these web sites.
7.
Enter the web keywords to deny traffic with the same keywords
8.
Click the Submit button to store the changes.
The figure above shows DNS server status. User is able to see host name, IP address, and Source.
For user hosting service with a dynamic IP from ISP’s DHCP server, Dynamic DNS allows server to match ever changing IP to work station which the service is
provided. Check “Enable Dynamic DNS” box and enter User Name, Password, and Host Name to register with Server.
Advance Filtering
Advance Filtering