Dell 2350 Wireless Broadband Router - Manual (Page 180)

Broadband Router, the home page will be loaded automatically. While the Wireless 2350 resets, the Power light on the front panel of the
router blinks.
NOTE: You must be connected to the Internet to check for firmware updates
NOTE: Dell does not recommend upgrading the Dell Wireless 2350 Broadband Router from a wireless client. Dell recommends
connecting to your Dell Wireless Router with a LAN cable connection to perform your firmware upgrades.
Back to Top
Reset Device
Reset the Device
Use the Reset Device function if a system failure occurs. This feature does not reload the factory default settings. It simply resets the
device to the network settings that existed on the device before the system failure occurred. This is equivalent to unplugging the device
and plugging it back in or pressing the reset button for less than 3 seconds until the Power light starts to blink. No settings are lost.
NOTICE: If you were in the process of updating the network settings, those changes are lost when the device is reset.
Click the Start button to reset the Dell Wireless 2350 Broadband Router to its current firmware settings. While the Dell Wireless 2350
Broadband Router is reset, the Power light on the front of the router blinks.
Back to Top
Back to Contents Page