Dell XPS/Dimension XPS Gen 4 - Manual (Page 90)

90
Removing and Installing Parts
www
.dell.com | support.dell.com
Power Cable Connector
Hard Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
NOTICE:
To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a
surface, such as a foam pad, that will sufficiently cushion it.
1 If you are replacing a hard drive that contains data you want to keep, back up your files before
you remove the hard drive.
2 Follow the procedures in "Before You Begin" on page 67.
Removing a Hard Drive
1 Press in on the top shroud tabs
and tilt the shroud back.
2 Lift the shroud away from the
hard drive.
power input
connector
power cable