Dell XPS/Dimension XPS Gen 4 - Manual (Page 93)

Removing and Installing Parts
93
11 Close the computer cover (see page 114).
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into
the computer.
12 Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software
required for drive operation.
13 If the drive you just installed is the primary drive, insert a bootable floppy disk into drive A.
14 Turn on the computer.
15 Enter system setup (see page 120), and update the appropriate Drive option.
16 Exit system setup, and restart the computer.
17 Partition and logically format your drive before you proceed to the next step.
See the documentation for your operating system for instructions.
18 Test the hard drive by running the Dell Diagnostics (see page 56).