Replacing the camera, Procedure, Post-requisites – Dell Alienware 13 (Late 2014) User Manual
Page 102
Replacing the Camera
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before Working Inside Your Computer
After working inside your computer, follow the instructions
in
After Working Inside Your Computer
. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
NOTE: This chapter is applicable only if you have purchased a laptop with
non-touchscreen display.
1
Using the alignment posts place the camera module on the display back-
cover and snap it into place.
2 Connect the camera cable to the camera module.
Post-requisites
1
Replace the
.
2 Replace the
.
3 Replace the
4 Follow the procedure from step 5 to step 9 in “Replacing the
5 Follow the procedure from step 3 to step 7 in “Replacing the
6 Replace the
.
102