Dell Alienware 13 (Late 2014) - Manual (Page 75)

Removing the Coin-Cell
Battery
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before Working Inside Your Computer .
After working inside your computer, follow the instructions
in After Working Inside Your Computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS
settings to default. It is recommended that you note the
BIOS settings before removing the coin-cell battery.
Prerequisites
1 Remove the base panel .
2 Follow the procedure from step 1 to step 5 in “Removing the solid-state
drive ”.
3 Follow the procedure from step 1 to step 8 in “Removing the palm rest ”.
4 Remove the display assembly .
5 Follow the procedure from step 1 to step 5 in “Removing the power-adapter
port ”.
Procedure
1 Disconnect the coin-cell battery cable from the connector on the system
board.
75