Dell Vostro 1000 (Mid 2007) - Manual (Page 106)

106
Adding and Replacing Parts
Coin-Cell Battery
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE:
To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
1 Follow the procedures in "Before You Begin" on page 89.
2 Remove the hinge cover. See "Hinge Cover" on page 100.
3 Remove the keyboard. See "Keyboard" on page 101.
1 system board
connector 2 antenna cables (2) 3 antenna cable
connectors (2)
2
1
book.book Page 106 Friday, October 19, 2007 2:03 PM