Dell Vostro 1000 (Mid 2007) - Manual (Page 108)

108
Adding and Replacing Parts
5 Loosen the captive grounding-wire screw.
6 Disconnect the display cable, using the pull-tab.
7 Dislodge the display cable from the display cable channel.
8 Lift the display away from the computer.
NOTICE:
The standby switch is fragile and easily broken. Avoid knocking the
switch when removing and replacing the display.
1 screws (2) 2 display cable 3 display cable pull-tab
4 captive grounding-
wire screw 5 antenna cables (2) 6 standby switch
7 display cable
connector on system
board 8 display cable channel
2 3
5
1 4
7
8
6
book.book Page 108 Friday, October 19, 2007 2:03 PM