Replacing the display assembly – Dell Alienware M15x (Early 2011) User Manual

Page 75

Advertising
background image

075

075

/

CHAPTER 17: DISPLAY

Replacing the Display Assembly

Follow the instructions in “Before You Begin” on page

1.

6.

Align the screw holes on the display hinges with the screw holes on the

2.

computer base.

Replace the four screws (two on each hinge) that secure the display

3.

assembly to the computer base.

Route the Mini-Card antenna cables through the routing guides and

4.

connect them to the respective Mini-Cards.

Route the display and camera cables through the routing guides and

5.

connect them to the system board connectors.

Replace the two screws in the battery bay.

6.

Replace the palm rest (see “Replacing the Palm Rest” on page

7.

39).

Replace the keyboard (see “Replacing the Keyboard” on page

8.

35).

Replace the center control cover (see “Replacing the Center Control Cover”

9.

on page 31).

Replace the memory module(s) (see “Replacing the Memory Module(s)” on

10.

page 23).

Replace the hard drive (see “Replacing the Hard Drive” on page

11.

18).

Replace the compartment door (see “Replacing the Compartment Door” on

12.

page 14).

Replace the battery pack (see “Replacing the Battery Pack” on page

13.

8).

CAUTION: Before turning on the computer, replace all screws and

ensure that no stray screws remain inside the computer. Failure to do

so may result in damage to the computer.

Remove the four screws (two from each hinge) that secure the display

13.

assembly to the computer base.

Tilt the display assembly towards the computer base at a 45-degree angle

14.

and lift the display assembly off the computer.

1

2

1 display assembly

2 screws (4)

Advertising