Dell 2709W Monitor - Manual (Page 18)

Using the OSD Menu
1. Press to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input
If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below appears.
If either Composite, or Component input is selected and the cables are not connected or the video source is turned off, the screen does
not have an image. If any button is pressed (except power button), the monitor displays the following message:
or
or
4
OSD Menu
Use this key to open the on-screen display (OSD). See Using the OSD Menu .
5
Exit
Use this key to exit the OSD menu.
6
Power button
(with power light
indicator)
Use the power button to turn the monitor on and off.
The blue light indicates the monitor is on and fully functional. An amber light indicates power save mode.
NOTE: If you change the settings and then either proceed to another menu, or exit the OSD menu, the monitor
automatically saves the changes. The changes are also saved if you change the settings and then wait for the
OSD menu to disappear.