Dell 2709W Monitor - Manual (Page 24)

Wide Mode
Horizontal Position
Vertical Position
Sharpness
Zoom
Pixel Clock
Phase
Dynamic Contrast
Display Info
Reset Display Settings
Back
Adjusts the image ratio as 1:1, Aspect or full screen.
NOTE: Wide Mode adjustment is not required at optimal preset resolution 1920 x 1200.
Use the and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
Use the and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100' .
Use the Zoom function to zoom in to specific area of interest.
Using the and keys to zoom in and out.
T he Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through the main OSD menu, by selecting
'Image Settings'.
Use the and buttons to adjust for best image quality.
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.
NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
Allows you to increase the level of contrast to provide sharper and more detailed image quality.
Displays the monitor's current settings.
Resets the display settings to the original factory settings.
Press to go back to the main menu.