Dell 928 All In One Inkjet Printer - Manual (Page 13)

Swedish
German
Power
Save
Set the inactivity time after which the printer is automatically switched off: 10 mins, 30 mins, 60 mins or now.
When the printer is set up for energy saving mode (for any of the operator panel settings: 10 mins, 30 mins,
60 mins or now), you can restore it to normal operating mode by pressing one of the operator panel buttons,
or by sending a print, copy or scan operation from the computer.
The printer remains in energy saving mode even if a device is connected to the PictBridge USB connector, or
a compatible memory card is inserted. In this case, to use the printer again, the user must press any button
on the operator panel.
If a device is connected to the PictBridge USB connector or a compatible memory card is inserted, the printer
remains on and energy saving mode is disabled.
Bluetooth
Settings
Bluetooth
Discovery Mode
Security
Passkey
Device Name
Device Address
Paper Type
PictBridge
Settings
Render mode: Colour, B/W, sepia.
Border: Borderless, Bordered.
Layout: 1/page, 4/page, 9/page, 16/page.
Quality: Normal, Photo, Draft.
Paper Type: Plain, Coated, Photo, Transparency.
Brightness: 10 levels of brightness can be set.
Enhance: On, Off.
Red eyes: On, Off.
Print All
Settings
Prints a listing of the current settings for Setup mode.
Changing Bluetooth Default Settings
To print from an external Bluetooth-enabled device you must set up the printer for Bluetooth connectivity.
You can select, modify and display Bluetooth settings on your printer as follows:
1. In Setup mode, use the Arrow buttons to highlight Bluetooth Default Settings.
2. Press the Select button to display the Bluetooth sub menu.
Bluetooth Sub
Menu Item
Settings
Bluetooth
Enabled (default), Disabled.
When Bluetooth is Enabled, the printer accepts Bluetooth connections and allows the
USB Bluetooth adapter to communicate with other Bluetooth-enabled devices.
Enabled (default), Disabled.