Dell 928 All In One Inkjet Printer - Manual (Page 29)

Enhance
Red eyes
Settings
Option Setting
Edit
Allows you to modify these characteristics of the selected photo:
Brightness: Allows you to set the brightness level from the seven levels available. Use the Arrow
buttons to increase or decrease the level.
Rotate: Apply an automatic rotation of 0° or 90°. The display shows the result of the operation that will
be applied to the photo.
Colour: Choose between Colour, B&W and Sepia.
Press the button to save the changes and exit.
Enhance
Press the Arrow buttons to select On or Off. If you choose On, automatic image correction is
performed on the image brightness, contrast and definition. This operation does not damage the original photo
in any way as it is only temporary and is not applied to the original.
Red
eyes
Press the Arrow buttons to select On or Off. If you choose On, the Red Eyes correction filter is
automatically applied.
Settings
From the Settings sub menu you can set Border, Layout, Quality and Paper Type. For more information, see
"
Defining the Photo Setup ".
NOTE: The selections applied to the photo are not shown correctly on the display but can only be seen when the photo is
printed. You must therefore print the photo to see the results of your modifications.
On exiting from the Options sub menu, you can save the changes made to the photo by pressing the Back button
.
NOTE: To cancel the changes made using in Edit mode, press the Cancel button.
Defining the Photo Setup
When browsing your photos, you can define the print settings you want used when a given photo is printed.
1. In Photo mode on the operator panel, use the Arrow buttons to highlight Browse then press the Select button
.
2. Press the Arrow buttons to scroll through the photos on the memory card or USB memory pen until you find the