Cisco IP/TV 3400 Series - Manual (Page 77)

3-15
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Chapter 3 Installing the IP/TV Server
Installing Cisco IP/TV 3426 Broadcast Server Units
Figure 3-13 Attaching the Slide Rails to the Rack
Step 5 Align the slide rail assembly to the front flange on the rack and insert and tighten
two M6 screws to secure the slide rail to the front flange. (See
Figure 3-13 .)
Repeat Step 4 and Step 5 to install the other slide rail assembly.
Note If it is necessary to adjust the length of the slide rail, loosen the
adjustment screw (labeled 2 in
Figure 3-13 ) on the rear of the slide rail;
then adjust the length of the slide rail and tighten the adjustment screw.
1 Tab 2 Adjustment screw
3 Rear flange
Rear
Front
83199
1
3
2