Cisco IP/TV 3400 Series - Manual (Page 94)

Chapter 3 Installing the IP/TV Server
Connecting Cables to Video Capture Cards
3-32
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
For more details on the contents of the IP/TV Server accessory kit, see the “Server
Accessory Kits” section on page 1-24 . If any items are missing or damaged,
contact your place of purchase.
To connect the Winnov Videum 4400 AV video capture card to video and audio
sources, follow these steps:
Step 1 Plug a BNC connector cable into the first channel (labeled 2 in Figure 3-24 ) on
the capture card.
Figure 3-24 Winnov Videum 4400 AV Video Capture Card—Connecting to the
Video Source
Step 2 Connect the other end of the cable to the video source that you want to use for this
channel.
Step 3 Plug the 4-channel audio connector cable into the audio port (labeled 1 in
Figure 3-24 ) on the video capture card.
Step 4 Locate the connector marked Channel 1 at the other end of the cable, and connect
it to the audio cable from the video source connected to Channel 1 on the video
capture card.
Step 5 Repeat Step 1 , Step 2 , and Step 4 to connect the other video sources to the video
capture card.
1 Audio in port 2 Video in ports
96402
1 2