Cisco IP/TV 3400 Series - Manual (Page 85)

3-23
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Chapter 3 Installing the IP/TV Server
Installing Cisco IP/TV 3427 Broadcast Server Units
Note Make sure that the slide rails are securely seated on the mounting flanges.
When the slide is secure, the slide rail pins protrude from the slide rails.
Figure 3-18 Aligning the Slide Rails
Step 3 Extend the slide rails fully from the rack until the slide rails lock. Align the tabs
on the slide rails (labeled 1 in
Figure 3-19 ) with the matching insets on the IP/TV
Server and lower the IP/TV Server onto the slide rails.
Note Make sure that each slide rail tab is inserted in the matching inset on the
IP/TV Server and that the IP/TV Server is resting on the top edge of the
slide rail.
1 Slide rail score mark 3 Rear mounting flange
2 Right slide rail
1
83130
2
3