Cisco IP/TV 3400 Series - Manual (Page 62)

Chapter 2 Preparing to Install the IP/TV Server
Safety Guidelines
2-8
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
• Handle all sensitive components in a static-safe area. If possible, use
antistatic floor pads and workbench pads.
• Handle the device carefully, holding it by its edges or its frame.
• Do not touch solder joints, pins, or exposed printed circuitry.
• Do not leave the device where others can handle and possibly damage the
device.
• Take additional care when handling devices during cold weather, because
heating reduces indoor humidity and increases static electricity.
Rack Installation Safety Guidelines
Before installing IP/TV Server in a rack, review the following guidelines:
• Two or more people are required to install the device in a rack.
• Ensure that the room air temperature is below 95°F (35°C).
• Do not block any air vents; usually 6 inches (15 cm) of space provides proper
airflow.
• Plan the device installation starting from the bottom of the rack.
• Install the heaviest device in the bottom of the rack.
• Do not extend more than one device out of the rack at the same time.
• Remove the rack doors and side panels to provide easier access during
installation.
• Connect the IP/TV Server to a properly grounded outlet.
• Do not overload the power outlet when installing multiple devices in the rack.
• Do not place any object weighing more than 110 lb (50 kg) on top of
rack-mounted devices.